Bay BayStack 400-ST1 Manuel d'instructions télécharger pdf (Page 27)

b. Connect the other end of the cascade cable to

the Cascade A In connector on the unit just

below the base unit (unit 2), or just above the

base unit if cascading up the stack.

c. Continue attaching the cascade cables until

the last unit is configured.

A maximum of eight units can be configured per

stack.

d. At the last unit in the stack, connect one end of

a cascade return cable to the Cascade A Out

connector. Connect the other end of the

cascade return cable to the Cascade A In

connector on the base unit.

8. Make sure all cable connections to the cascade

connectors are secured firmly by the thumb screws

on the cascade cable plugs.

Note:

For stacking three or more units, order the

optional 1 meter (3.28 ft) or 3 meter (9.84 ft) cascade

return cable (Figure 2).

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 41 42

Pas de commentaire

Bay BayStack 400-ST1 Manuel d'instructions Page 27