Bay BayStack 400-ST1 Manuel d'instructions télécharger pdf (Page 21)

Installing the 400-ST1 Cascade Module

The Cascade Module slot on supported switches can

accommodate a single 400-ST1 Cascade Module.

To install a 400-ST1 Cascade Module into the Cascade

Module slot, follow these steps:

1. Unplug the AC power cord from the back of the

switch.

2. Remove the filler panel from the Cascade Module

slot (Figures 8 and 9).

•

BayStack 450 and 410-24T

-- Use a

Phillips-head screwdriver to loosen the two

thumbscrews and remove the filler panel

(Figure 8).

Figure 8. BayStack 450/410-24T Filler Panel

BayStack 410-24T

BayStack 450

1 = Filler panel

2 = Cascade module slot

BS0036B

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 41 42

Pas de commentaire

Bay BayStack 400-ST1 Manuel d'instructions Page 21