Bay BayStack 400-ST1 Manuel d'instructions télécharger pdf (Page 7)

Cascade A Out Connector

Provides an attachment point for connecting this unit to

another unit via the cascade cable. A return cable from

another unit’s Cascade A Out connector to this unit’s

Cascade A In connector completes the stack connection

(see the example shown in Figure 3

Unit Select Switch

The Unit Select switch (up = Base) determines the base

unit for the stack configuration (see “

Base Unit

Description” on page 7). The Unit Select switch status is

displayed on the BayStack 450 LED display panel (see the

Using the BayStack 450 10/100/1000 Series Switch guide

for details). When in the Base (up) position, all other Unit

Select switches in the stack configuration must be set to

Off (down).

Note: For stacking three or more units

(maximum 8 units per stack), order the optional

1 meter (39.27 inch) cascade max-return cable

(Bay Networks Order No. AL2018001).

1 2 3 4 5 6 7 8 9 10 11 12 ... 39 40

Pas de commentaire

Bay BayStack 400-ST1 Manuel d'instructions Page 7