Bay BayStack 400-ST1 Manuel d'instructions télécharger pdf (Page 19)

Installing the 400-ST1 Cascade Module

The Cascade Module slot on the BayStack 450 switch can

accommodate a single 400-ST1 Cascade Module.

To install a 400-ST1 Cascade Module into the Cascade

Module slot, follow these steps:

1. Unplug the AC power cord from the back of the

switch.

2. Loosen the thumbscrews and remove the filler

panel from the Cascade Module slot (Figure 7

Figure 7. Removing the Filler Panel

3. Insert the 400-ST1 Cascade Module into the

chassis slot taking care to slide the module into the

guides provided on the chassis (Figure 8

BS0036A

1 = Filler panel

2 = Cascade module slot

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 39 40

Pas de commentaire

Bay BayStack 400-ST1 Manuel d'instructions Page 19