Bay BayStack 400-ST1 Manuel d'instructions télécharger pdf (Page 38)

Upgrading the BayStack 450 Switch

Firmware

The BayStack 450 switch firmware provides a code load

facility that allows you to upgrade the firmware image

over any switch port, including any MDA ports.

You must upgrade the BayStack 450 switch firmware

image before you install the BayStack 400-ST1 Cascade

Module.

Accessing the Firmware Images

You can access the firmware image files directly on the

World Wide Web, as follows:

1. Go to support.baynetworks.com/software/ethernet/

baystack_450.html

2. Under the Operational Software heading, click on

Version 1.1.0 at the BayStack 450 boot code link.

Follow the prompts to download the BayStack 450

boot code image. The boot code image filename is

b4501101.img

Note:

When upgrading the firmware image to

software version V1.1.0, you must download

two

images

(the

boot code image

and the

agent image

) for

proper operation of the switch. The new boot code

image must be downloaded

before

the agent image is

downloaded.

1 2 ... 33 34 35 36 37 38 39 40

Pas de commentaire

Bay BayStack 400-ST1 Manuel d'instructions Page 38